Nozzlebrush - Hexagon version

I needed a brush that fit the pads i had access to (30x30x3mm), so i decided to create my own. Can be printed without support. 

So here it is, simple design but works great. Design inspired by the hexscraper and hexagons! 

Materials needed:

2x 30x30x3mm selfadhesive feltpads (wool)

Instructions:

Fold each pad in half, use the adhesive side to keep them folded together. Take the 2 folded feltpads and squeeze them into the brush. The tight fit keeps them in place when used, but can easily be changed if needed.

Print Settings

Printer: Prusa MK3S+
Material: PETG (any material should work)
Nozzle: .4mm
Resolution: .2mm
Infill: 30% (rectilinear)
Vertical Shells: 3
Horisontal Shells: min. 1mm
Support: No
Rafts: No
Notes: 
Arachne perimeter generator. Designed with .4mm nozzle in mind.