Skadis OLED Nintendo Switch Dock Mount

Skadis-compatible mount for the Nintendo Switch OLED model.
19
108
2
713
updated November 7, 2023

Description

PDF

I've only done a test print at .28mm with 15% grid infill and tree support, but it came out great and is still very functional. Obviously settings could be refined to your liking if you'd feel better with higher resolution and infill.

Model origin

The author remixed this model.

Differences of the remix compared to the original

A very crude adjustment to the original model. The original design was great; however, I found it was about 3mm shy of fitting the OLED dock, and the walls came up slightly too high to allow the Switch to fully seat in the dock and be able to charge. So I lowered the walls and widened the base for it to fit. The hooks for attaching to skadis are unchanged from the original design.

However, I'm very new to any kind of 3D modeling, so there is no cutaway for the bottom USB port, nor for the indicator light on the front corner of the dock.

License