Press-Fit Raspberry Pi Pico Case

Press-Fit Raspberry Pi Pico case. 

Note:  If you have soldered on headers, I recommend you use this which is remodeled and specifically made to accommodate headers: Press-Fit Raspberry Pi Pico WH Case (fully protects headers)

That being said…

Includes various tops with different features (with or without BOOTSEL hole, header holes, extra deep).  The extra deep top is the same height as the headers so they will not stick out past the enclosure.

Various bottoms with different offsets that adjust snap fit.  Start with 0 offset.  If too lose, use negative offset.  If too tight, use positive offsets.