3D MODEL DESCRIPTION
Tokyo Ghoul Art printed in color, the color change of the printer can also be used,
it does not require AMS or MMU,
in the slicer program set the color change to the recommended height.
3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Swap Instructions:
Start with Black
At layer #4 (0.48mm) swap to Red
At layer #12 (1.12mm) swap to Silver
At layer #15 (1.36mm) swap to Pink
At layer #16 (1.44mm) swap to White for the rest.
If re-scaling model make sure not to alter the Z height of the model
The author marked this model as their own original creation.