Headrest Mount for Multifunction Arm

Addon for the incredible multifunction-arm-mounting system of @RostaP:

https://www.printables.com/model/165239-multifunction-arm-mounting-system

Headrest adapter with adjustable size fitting the small-arm version of RostaP. The mount is designed for a Multivan T7 headrest, but should fit any headrest with 14mm poles. I did not mark the model as remix, because I only used the connector geometry + Screw for compatiblity reasons.

Printing

I recommend printing in some more durable material than PLA. I used PETG and hope it will resist the temperatures in our car also in summer ;-). We will see…

No Supports needed, I used 3 Perimeters and 20% Gyroid infill.