thanks for the model, I had to scale it down to 70%, didn't fit my build plate, but everything worked perfectly
Self watering seed starter
A Self watering seed starter with a place to label what is inside
In the contest Gardening Tools
135
764
5
4351
updated April 16, 2021
Makes
Comments
Came out good, had to scale everything down to about 90% to fit the large tray on my printer, but it came out great, can't wait to get some things going.
I printed a 1x3 scaled 80% to reduce print time (~3 hours). I scaled the pots 81% so they fit snug. Can't wait for my chili peppers to start growing!
Also, I like that you kept your design open for people to do whatever they want with it.
@Swimfar Can you share your files or tell me what software you used to make the edit?
@DBabs_319266 I don't know of a good way to share the file. But I just used PrusaSlicer to scale the print down. In the Object Manipulation panel on the main screen there is a row of scale factors for the X, Y, and Z directions. By default they should be locked together, so changing one will change all of them. Simply change them from 100 to 80.
Model is fine i had some problems with thin walls in my prints. Think it was a settings issue
Works pretty well
Let’s see if it works. The inner plant boxes could need at least one more bottom layer. But it fits perfectly.
Thanks for printing my model and for reporting the problem
@Mxchxl its not really a Problem, it would make it it little stronger. But thanks you for your Design.