Creative Stage Air Soundbar Mount

Balance the weight out with two screws!

Recommend printing on the oval face (lying down) for strength, and increasing perimeter count.

Installation instructions to get both screws in for both sides:

• place the two sides on the extreme ends of the soundbar
• mark the outer screw hole for each side on your surface
• remove a mount and use it to mark the second hole for each side
• screw in the mount for the right side first (non-logo side) so that you can slide the soundbar further in
• before screwing in left side mount, slide the soundbar in on the right and past the two screw hole marks
• have a friend hold that soundbar up (or use your arms/elbow) while you screw the left side mount
• slide the soundbar back into the left mount such that it balances across the left and right

Merged the left and right bodies and thinned them to about the same thickness, making them suitable for any top-mounted flat surface as opposed to the weight being held by a single screw on one side.