PRUSA Enclosure Organizer Tray System

Here is a modular PRUSA Enclosure organizer tray system. I designed it to fit snugly around the front of the PRUSA MK4 and organize my tools and printing accessories. It keeps things organized and out of the paths (within reason of course) of the print bed and extruder head carriage. 

You don't have to bolt it together to keep it from interfering with the printer if you want to maintain the ability to remove the printer quickly.  

Fasteners Required:

8x M3x6mm Hex Socket Cap Screw

8x M3 Nuts

I printed all three trays with 0.3mm layer height, 2 perimeter vertical shells, 4 top and bottom solid layers, and 15% infill using one brand new spool of PLA and had about 200g of filament remaining.  

NOTE: Pictures were taken using M3x10mm screws before I recessed the nuts in the model. Current models have both the heads of the screws and the nuts recessed.