Kitten - HueForge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ IIID Max Apple Green Transmission Distance: 4.5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #9 (0.48mm) swap to Blue
At layer #11 (0.56mm) swap to Apple Green
At layer #14 (0.68mm) swap to Pure Yellow
At layer #23 (1.04mm) swap to Cotton White for the rest.