TAPO C200 holder for Original Prusa Enclosure

TAPO C200 mount for Original Prusa Enclosure. I created left and right option.

I added also version “classic”, which mean just the place for mouting the holder for camera with original holder.
AIO version, which means, that you need only one nut and one screw, mount it to enclosure and place on it the camera. For easier printing I added also version without the “tail” so you can print it on the bed easier. With the tail I recommend print it standing up with brim activated and support of course.

Version classic
For assembly you need:
2x M3x12 countersunk screws
1x M3x12 screw
3x M3n nut

Version AIO (All in one) w/o “tail”
For assembly you need:
1x M3x12 screw
1x M3n nut

4.11.2023 - I changed the locking position for AIO versions, so the cable is now more to the side instead closer to the printer.

Changed nut position (which hold on enclosure) for better installation and added “tail” to hold better on place.