Spray Box

Warning: use this spray box ONLY outdoor it has no fans and no filters!

Easy and solid outdoor spraybox. You can put a cardboard/carton on the lower side to have a straight floor. You can also use the middle connector on the top side to hang down your model.

I used cover film (Maler Abdeckfolie) on the sides.

You can also glue (e.g. hotclue) the pipe into the corners - but I want to disassemble it to store it in a small package. 

If you glue the pipes into the corners you don't need the M3 screws and the “Inlay.stl” part.

FreeCAD source is located: https://github.com/hggh/3d-stuff/blob/master/SprayBoxOutdoor.FCStd