Raspberry Pi Zero Tripod Mount (1/4")

• Place upside down (nut to the top) and use (organic) support. I propose to print in PETG for stability.
• Remark 1: The nut is made of plastic, do not tighten to much!
• Remark 2: Check the orientation of your camara, as e.g. MotionEYE does not have a rotate option! I ended up drilling a hole for the power supply…

I wanted to place a Raspberry Pi Zero (with Camera module) on a tripod, but could not find a good solution. Combining the Raspberry Pi Rero Mount with a ¼" nut, you can place a directly on a tripod. Modification was simple and done directly in Prusa Slicer.