Nintendo Switch Pro Controller Stick Locks

Description

Prevent your Switch Pro Controller from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift long term.

Print Settings

• Layer Height: .15mm Quality
• Infill: 5% (there is basically no infill)
• Supports: None
• Material: PLA recommended, this PLA works well for me¹

Design Notes

These are a modified version of my ROG Ally Stick Locks tuned to fit the Switch Pro Controller better. You can add a material change during the print if you want the sides to be more clear with colors. 

There are two versions, one has an Switch Logo embedded, and the other does not. I use this to help identify the sticklocks for my different controllers. The logo is very small and can be difficult to print.

Other Versions

As the comments have found, these stick locks do work on other types of controllers, but I also have made versions tuned for other types of controllers:

• ROG Ally
• Xbox Elite II

Purchase on Etsy

If you don’t have a 3D printer I do sell these on Etsy:

https://arcanelayers.etsy.com/listing/1774443156

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!

Modified to better fit the Nintendo Switch Pro Controller