Benchy Display Rack Holder

Push and twist right in place. Sits firm in place for no wiggle or movement.

Holds in from the 9mm hole in the back of the Benchy. 

• Holds 7-3 Benchys
• Screw/Tape option (4mm Screw Hole)
• 20%infill
• No supports

STEPS:

1. Rotate Benchy to the Right a bit
2. Put the Benchy on the corner. 
3. Rotate it a little bit to the left and add pressure. Push back as far as possible.

Some of the pegs are tighter than others. need to add more pressure.

(Tape sticks on Wood, Cardboard, Metal, etc)
Thin Double Sided Tape: (Amazon)⬇

https://a.co/d/gOwTFot

Measurements:⬇