Tripod phone mount

Secure phone holder with 1/4 inch. tripod thread
25
152
2
1701
updated April 30, 2023

Description

PDF

I needed a support to place my cell phone on the tripod and after not finding any that made me feel confident I decided to design my own.

Some things to take into account is that the support has a built-in tripod thread, since in Spain it is quite difficult to find 1/4 inch nuts. Also an 8mm M3 screw is needed to attach the wheel to the threaded rod.

 

Print instructions

  • Recommended 0.2mm layer height.
  • All parts should be printed in the default orientation for best results.
  • It is recommended to print the rod with a brim of 3-4mm.
  • The bottom part contains a 0.2mm layer on top of where the wheel is located to allow for unsupported bridging. This layer must be cut once the part is printed.
  • No support needed.

 

Hardware

  • M3 x 8mm screw

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more