This adorable little creature is a simple mechanical toy that takes only 10 minutes to print
10m
3× print file
0.30 mm
0.20 mm
0.40 mm
3.00 g
8
44
2
238
updated November 16, 2023

Description

PDF

This adorable little creature is a simple mechanical toy that takes only 10 minutes to print.

Thread a piece of string through the holes on the reverse side and hook it onto anything. Then by alternating pulling the left and right end make the bat rise to the top. Then release the tension in the string and it will drop back to the starting position.

Video of how it works

We also used this mechanic in other toys which you can find here


3D PRINTING SETTINGS
Layer height 0.15 – 0.3 mm
Infill 10%
No supports

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This model was brought to life by Filip from 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here

Tags



Model origin

The author marked this model as their own original creation.

License