Fisher-Price Controller Analog Mounts

This project picks up where the Adafruit learning guide ends.

Originally this started to mount the Grove - Thumb Joystick, but evolved into mounting six additional buttons. This enables the top four rocker buttons to become real buttons that can interface with GP2040-CE and mapped to button outputs. Also two additional back buttons can be added to fit within the pre-cut holes used by the original packaging to hold the controller in place.

Hardware Needed:

• Fisher-Price Controller https://amzn.to/47bzJF8
• Adafruit KB2040 https://www.adafruit.com/product/5302
• Small Tactile Buttons https://amzn.to/4hnUIsW
• Grove Thumb Joystick https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/101020028/5482579
• A few M2 screws https://amzn.to/3T2E4X9

Firmware Needed:

• https://github.com/RobertDaleSmith/GP2040-CE/releases

Updated Wiring Diagram:

• https://github.com/RobertDaleSmith/GP2040-CE/tree/kb2040-fisher-price/configs/KB2040-FISHERPRICE-V2

Notes:

• Grove Thumb Joystick's header will need to be removed to fit the mount.