My Keys key hanger/holder/hooks

Key hanger (holder, hooks) using words "My Keys".

Print Settings

Material: PLA
Layer height: 0.2 mm 
Perimeters: 3
Top layers: 3 layers
Bottom layers: 3 layers
Infill: 25%
Supports: yes (just for holes)
Ironing: optional (for smoother top)

Print Instructions

Print is easy, use supports for screw holes and optional ironing for top-most layers only to make it smoother. There is a 3mf for BambuStudio/OrcaSlicer with everything set up.

Print 7x peg, one my part and one keys part. Use a contrast/different color for pegs to make it nicer.

Assembly

You'll need:

• 4 wall plugs (4mm x 25mm)
• 4 black wood screws (3.5mm x 22mm)
• 7 wood screws (3.5mm x 22mm)

Steps:

1. Remove supports.
2. Screw in the pegs from behind.
3. Position it on a wall and mark the holes.
4. Drill the holes and insert the wall plugs.
5. Screw it in.
6. Enjoy!