Height-adjustable support cone. For pieces with an irregular surface base.
2h 31m
2× print file
0.20 mm
0.40 mm
25.00 g
Anycubic Mega S
In the contest Painting Helpers
345
622
9
5835
updated October 29, 2023

Makes

Comments

Printed a PETG set (8 pieces) in one plate beautifully on a Bambu A1 Mini. Threads are snug and everything works well. Already covered in paint :)

Smart, simple model. Fantastic addition to the painting tools.

Brilliant.
Thank you for this great model.

These are amazing! Thanks heaps for sharing.
I didn't print the screw inserts - opting for just the cones as I mainly paint flat things on a flat table. Makes the bottom edges so much easeir to get and I don't have to wait for one side to dry before flipping it.
Printed at 0.2mm layers with 5 walls in ASA on Bambu P1S.

The cones are working great, the clearance on thread is also spot on! Well done!

Printed some of these out for future projects, using some leftover filament.

A small problem when printing with the shifting of layers, but it is irrelevant to the functioning (of course, it is the printing fault, not the design fault:) ). Great project and definitely very useful. Thanks.

All comments loaded