The base warped slightly, otherwise it printed fine.
The connection is a tiny bit loose. It would benefit from a little bump to make the two parts snap together and not let them be separated easily.

The base warped slightly, otherwise it printed fine.
The connection is a tiny bit loose. It would benefit from a little bump to make the two parts snap together and not let them be separated easily.
It's a good size to paint conveniently. (printed with PLA). I had some warping issues with the green part (bottom / base piece) even though its rounded so make sure to apply a brim, people!
The rotation was too loose but I suspect that's because of the warping, so I superglued the two pieces together since you can easily rotate it from the base instead.
Needs some weight in the base, but it spins free. I will probably clamp it to a table (edited)
@lazerBot_1646157 Think you may have posted under the wrong model :)
sorry that's my bad....
love it
It was amazing, my sister loved it :)
I wish the top part didn't always fall off (or like separated)
Love the simplicity of this and is exactly what I was looking for in a turntable. I printed it and it came out perfect. Thanks for the upload.
Perfect print, eSun Marble 0.2mm nozzle, 0.2mm layer height, 205C Nozzle, 60C Bed