Tony made this in a cave, with a box of scraps.
Now you can make it with your 3D printer!
Attain the power of an Arc Reactor fueling all your gaming performance!
Note everything is 3D printed!
I looked at the Atmos cooler and thought
“hmm, wouldn't it be cool if there was an iron man arc reactor there?”
This is a very satisfying model that fits into place and all you need at the end is super glue or adhesive!
You just need to glue the wire together with the holder and that onto the main body once you have slotted in the detail plate into the retention plate into the main body. Then seal it off with the wire holder with the wire. Note the parts are split up so you can spray paint or 3D print in different colors as well. A nice metal finish can give you parts closer to the ones in the renders.
Assembly video coming out soon!
INSTRUCTIONS FOR MAIN BODY ONLY!
If you want the best luminance, use semi transparent filament for the main body to get a diffused look. You Can use white filament just make sure to print with lower amount of walls and top and bottom layers to get the luminance. Also low infill if any in order to not block the light.
INSTRUCTIONS FOR PRINTING
PRINT 8 wire models and 8 Wire Holders models. Print only one of Other models.
ALSO USE orientation in picture to help print parts in good quality. Only main body, wire holder and wire need support. Note that the orientation for the wire model depends on whether you have better quality when printing on a build plate vs overhang quality.
Print in 0.2 or finer layer height for pretty prints!
Also parts are slightly altered from render to ensure best tolerances. Please note the tolerances are 0.4 - 0.2 mm on each side.
Render CPU cooler is not the same but similar to the Atmos cooler. Used only for rendering. Modeling References were derived from Cooler Master provided 3D models.
Thanks to Yolala1232 for the pc 3D model.
Also please like and share this with friends and family! Any questions? Comment and I'll happily answer!
Happy Printing!
The author remixed this model.
Pretty massive changes to the aesthetics. modelled an arc reactor around it. Mounting of the piece is the same.