Fashionably late as always, so rev up those printers cause you got plenty more printing to do for the local guisers/trick-or-treaters!
No character this year, but instead a wee stone Mausoleum surrounded by a few equally cute little gravestones. The baseplate is an optional 2nd sprue, so it can work just as well without, but I recommend printing both at least once!
-----------------------------------------------
Unlike my older kit cards there is only one tightness variant, which if you find is not loose enough, try setting outer walls to print first, I found this to be the magic ingredient for my Ender 3's.
Included is a Frameless variant for those uninterested in the sprue card format.
Make sure to print a few of the gravestone pairs!
You can make it EVEN TIGHTER by increasing the Z-scale by 15%.
------------------------------------------------------------
Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit.
No hanging loop on this one, but can add one if asked nicely enough ;)
Having trouble getting the tolerances just right? Set Outer Walls to print first.
Makes greatly appreciated, always glad to see them! Happy Printing!
------------------------------------------------------------
All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!
If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!
The author marked this model as their own original creation.