Jerlo LCD 5" Mod on Prusa Bear + Halloween MOD

I developed and designed this mod to integrate a 5-inch screen on the front of my Prusa MK3 to integrate the installation of my Repetier server. Here Octoprint can replace Repetier without any problem, it's up to you. I found the mod in 3.5" too small with a lot of connection constraints.

This mod has a lot of advantage:

• The project contains multiple Finish Mod depending on your printer and server configuration. You have thr famous "Mod Halloween" for #PRUSAPRINTERS 2019
• Compatible with a 5 "screen Kuman
• Better resolution for tactile use
• The touch screen and its support are clipped on the prusa LCD screen
• Increased print quality : no diagonal printing as there are 2 separate parts
• No visible cables on the sides
• Hidden SD card
• Raspberry 3B+ remotely in my Jerlo Einsy Box to limit the constraints of connections with the screen and increase the cooling by the fans 5V: : https://www.prusaprinters.org/prints/6233-jerlo-einsy-box-bear

• Stylus support

• External power supply for the Raspberry

Assembly Guide is here :
https://www.dropbox.com/s/o03fu8uwv4vnq6s/Assembly%20Guide%20_Guide%20d%27assemblage%205P%20screen%20mod.pdf?dl=0

Do not forget that the new bear feet are now 15mm tall

->>>>> If you like my designs then follow me for the next ones :) !

Print instructions

Prerequisites you must have :

• You can use my Jerlo Einsy box to deport your Raspberry 3B + as the design allows you to connect an external power supply to the Raspberry and a HDMI cable from the 5 "screen to the RPi: https://www.prusaprinters.org/prints/6233-jerlo-einsy-box-bear

• CAUTION: this mod is compatible and adapted only with the Kuman 5 "screen: http://www.kumantech.com/kuman-5quot-inch-resistive-800x480-hdmi-tft-lcd-display-screen-module-with-touch-panel-pen-sd-card-for-raspberry-pi-3-2-model-b-rpi-1-b-b-a-a-sc5a_p0088.html?fbclid=IwAR04h8qQr217DsJLDKTqXFIcFy3YtUOH6hSX79DGdLLTvjsSwAPZ4Blci38

• You will need Dupont cable to connect the 5 "screen to the Raspberry (take 2 quantity to have 60cm in length) in male / female (MF + 30m): https://fr.aliexpress.com/item/32952634124.html?spm=a2g0s.9042311.0.0.6dfb6c37howWaw

• You will need a micro USB cable B angled 90 ° to power your raspberry: <a https://www.amazon.fr/gp/product/B00EBGGXS2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

• You will need a male / female HDMI cable with a length of 90cm: https://www.amazon.fr/gp/product/B01D5H8ZI8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

• You will need HDMI adapter 270° angled to fit into my Einsy box: https://www.amazon.fr/gp/product/B00Y7UT6EK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

• You will need a micro USB cable angled 90 ° to power your 5 "screen: https://www.amazon.fr/gp/product/B07G35FLVF/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

• Optional: If you want to protect your beautiful 5p screen: https://fr.aliexpress.com/item/32974383907.html?spm=a2g0s.9042311.0.0.27426c37K7TTjJ