Cat (Print-in-Place)

Print-in-place cat so you can keep a feline friend wherever you go! 

This is my second print-in-place design inspired by the turtle keychain but trying a new animal with more joints. There are two versions, the poseable one has 0.3 mm tolerances on all joints which leaves the legs and tail floppy, but the head poseable, while the loose version has 0.4 mm tolerances on the head so it's all floppy. 

Supports are not required and I recommend using 0.1 mm layer heights, but 0.15 and 0.2 have worked for me as well.

Enjoy!