New Dice for Balance Tetris game by @Paulorfo

The original dice was too light - the new dice will accept a 1/2" ball bearing in the center and has printable faces
7
21
0
318
updated October 23, 2023

Description

PDF

I love the Balance Tetris game by @paulorfo. I wanted a better dice for the game so I created one. This dice accepts a ½" G25 ball bearing in its center to make for some heft. I also might have gone a bit overboard but created faces for each side of the dice to accepted 5mx5mm printed squares. I have also included a blank face that you can print in your shapes color and glue that to the dice face. Our family played the game with the new dice and it acts like a real dice. I did the project this way so those without MMU or multicolor can still have a multi-color dice.  Just throw a few squares on the print bed when you print the parts and you are good.. or use the blank face and print a color “coin” for each side of the dice.

The ball bearings can be grabbed here: https://www.amazon.com/dp/B07CHSGGKK

PS. This is a great challenge to see how well your first layer prints - the small squares are 4.9mm x .60mm, the dice faces are .8 total but first layer is .2 to accept the printed squares. 

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more