My old DELL P2210 came with a proprietary monitor stand. This adapter converts it for use with standard VESA 100 monitors.
There is a standard (5 mm) and extra thick version (10 mm) attached - I only printed the standard version as it is strong enough for my 24'' monitor.
Requires 4x M4 20-25 mm screws (25-30 mm for extra thick version).
The 4 small holes must be drilled with a 2 mm drill.
Print settings
0.2 mm Quality preset with Prusament PLA
4 Perimeters
30% infill
70% infill for the top part (guide rail and holes)
or use the 3mf project files as example.
The author marked this model as their own original creation.