Looks great!
N64 Raspberry Pi 4 Case
Makes
Comments
Thanks. Great choice of color!
Raspberry pi fan doesn't fit shttered through the bottom when closing had to re print the bottom
@WilliamGodfr_1333023 Hi, thanks for your review... It's true these fans can vary in size. If you can provide measurements, I will gladly adapt the model for you.
Says Pi4 compatible but it is not. Had to do some (minor) modifications to get my pi4 to fit. 1) Removed the crossbar on the side near the USB/Ethernet ports and 2) Had to break off the sunken edge near the USB ports as well as the Pi4 switches the Ethernet & USB port positions (the Pi pictured in the original post is not a Pi 4)
View 2 more comments
@JoeSventek_149528 cross beam is indeed removable as mentioned in the description.
@Tmpx64 Oh I see 🤦
Thank you very much for the model, like it a lot! I printed it on my Ender 3 pro using differnt filaments. Main shell in extrudr NX-2 looks very good with its matte finish. The inside of the main body has to be printed with supports, of course, but turned out great!
Printed on modded Ender 3 pro @ 60mm/s
Filament: Extrudr NX-2
Bed: 60°C
Nozzle: 200°C
with supports (edited)
Not my model, but thanks for reviewing anyway...