Baylan Skoll [pre-supported]

Printing instructions

General

As is normal for my busts, he comes in two pieces. A main bust piece, and a base piece, to be printed separately.

There are two versions of the main piece, with different eyes. Concave, and convex. See below for difference:

FDM instructions

This one has been design to print without supports on FDM.

Resin instructions

Resin supports by Charro Zuck Support Services.

It comes in two formats.

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself.