Dia de Muertos (Day of the Dead) Themed Keychains

This is a collection of Día de Muertos (Day of the Dead) themed keychains / key tags. 

At 100% size, all keychains have four layers of the same heights, with total height of 2.8mm.

All keychain holes have an outside diameter is 8mm and an inside diameter is 4mm.  The widths of the keychain holes' rings are 2mm, and the heights are 1.4mm high.

Enabling ironing on top surfaces for best results.

Layer heights

There are four (4) layers of the following height (from bottom to top):

• Layer 1 - 1.4mm high, layers 0.0mm to 1.4mm
• Layer 2 - 0.6mm high, layers after 1.4mm to 2.0mm
• Layer 3 - 0.4mm high, layers after 2.0mm to 2.4mm
• Layer 4 - 0.4mm high, layers after 2.4mm to 2.8mm

Printing
 

All three (3) keychain / key tags pictured above were all printed with a 4.0mm nozzle, ironing all top surfaces, 1.0mm layer height, 25% infill, PETG filaments, and the following color changes:

• Layer 1 - base color
• Layer 2 - color change at layer height of 1.5mm
• Layer 3 - color change at layer height of 2.1mm
• Layer 4 - color change at layer height of 2.5mm