Milwaukee Battery Wall Mounts (M12 & M18)

Mount your Milwaukee M18 or M12 Batteries cleanly to your wall for the perfect organization solution!
123
916
6
2666
updated October 27, 2023

Description

PDF

Mount your Milwaukee M12 or M18 Batteries cleanly to your wall!

2 of each file are available.

  •   “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to take in and out of the mounts.
  • “Locking” files will allow the batteries to clip in and stay retained.  Perfect for mounting in work trucks/work vans, upside down or in strange orientations to keep the batteries from coming dislodged.  Batteries will clip in to this mount, but to remove, you must depress the retaining tabs on the battery before they will come out.

Hardware:

  • The only hardware needed to mount to the wall is 1.25" Construction Screws.
  • M12 Requires 2 Screws
  • M18 Requires 4 Screws

Print Settings:

  • Layer Height:        0.15-0.25mm
  • Perimeters:                 2-4
  • Infill:                        15%-30%
  • Supports:            None needed 

The M12 is my original design.  The M18 design came from bruno_74 on Thingiverse.  The non-locking M18 is the same shape, with the locking mechanism cut off.

Link to original design: https://www.thingiverse.com/thing:3983547

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more