Sanding Disk Storage Box and Lid Rounded

After buying too many discs of sandpaper I needed a larger version and felt the original model needed more plastic than necessary. Therefore I made this rounded version, but mostly in the same ‘style’. Uses the same dimensions and tolerances.

The original author worried that it wouldn't be strong enough, but it is plenty strong as far as I can tell.

I created a ‘normal’ version and a tall version which is twice as high.

Finally I added a disk with the center 100mm removed. I use the slicer to place the grit size on the tab and print it with dual colors. The relative y-location of the text is -62, the text size is 10 and I used the Noto Mono font.

A rounded version, but mostly in the same ‘style’. Uses the same dimensions and tolerances.

I also added a ‘normal’ version and a tall version which is twice as high.

Finally I added a disk with the center 100mm removed.