Camera Cold Shoe Offset Adapter

This is model is by Devin Montes, Make Anything on Thangs didn't see any good Cold Shoes Offset adapter on printables so just reuploaded it here for easier access.  

I printed this adaptor to make space for the RODE mic on my camera cage. Two versions included since the first one proved to be a bit too fragile. I also printed the second one in ABS, but that may not be necessary depending on what you're mounting! 

I ask Devin to make a 28mm version because there's all different types of cold shoe length and width. Also used my Orca Slicer to add a pause in the G-code to add dual filament color, if you want the adapter to go in the opposite direction just mirror the model in you slicer app.

Thanks for downloading! :)

Video demonstration

Print Time: 31m
Filament: 5g
Cost: $0.06 

Print Settings

• Rafts: No
• Brim: No
• Supports: No
• Resolution: 200
• Infill: 20%
• Infill Pattern: Gyroid
• Infill Combination: No
• Filament: PLA
• Brand:  HATCHBOX & Inland
• Color: True Orange, Light Olive, Purple