Dual 5015 fan duct for ender 5 s1

I was having cooling issues with a dual 5015 fan duct, so I developed this solution for a more direct airpath.
19
155
3
1146
updated October 31, 2023

Description

PDF

New version available, lowered the ducts to better aim. also removed the bottom half of the fan bracket, fan is only held by the top screws. This reduces the overall weight of the part as well as - for some reason unknown to me - makes the whole thing much quieter.

 

I was having cooling issues with a dual 5015 fan duct, so I developed this solution for a more direct airpath. 
 

It is loosely based on elPablo fan duct by NBR. 

I added version with or without a space for a regular adxl, and version with and without the front fan support.

I printed it in ABS with the fan ducts pointing down and regular supports on buildplate only.

For assembly, the fan needs two m3x30 screws and the fans use m3 screws to the extruder. Note that the right fan requires a longer screw, as creality didn't bother to make things symmetric. Note that you should probably use a washer, the bottom supports are meant for m4 screws. All holes are direct thread.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more