BTT SKR2 Ender 3

Remixed model from Ender 3 pro to Ender 3 (non pro). You can use the original model in the non-pro version of Ender 3, but you will have holes in the box. That's why I redesigned this original model and fixed these holes. You can use this model with (SKR2, SKR1.4, SKR1.4 turbo, SKR1.3) because these boards should have the same measurments. I used my own Ender 3 to measure these changes. 

I made the top cover longer, because the original design was made for the PRO version of Ender 3. Since I was not allowed to make the box smaller due to the size of the board, there was a hole on the other side of the metal frame. I covered it right away in the model box and did not make another top cover for it. At the same time, I made the canopy beveled so that the supports inside the box didn't have to be used.