Original art created by us, then we used Hueforge to create this 200x200 piece.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Gray
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Gray
At layer #15 (1.28mm) swap to Jade White for the rest.
The author marked this model as their own original creation.