Rapid Burner / Dragon Burner MGN9H X Carriage with Angled Belt Exit and integrated beacon probe mount

This is a variation of the dragon/rapid burner mount originally buy chirpy2605 and further modded by OldGuyMeltsPlastic@OGMP_407277. I've adjusted the belt path to be higher on the carriage widened the belt holes for easier belt threading and added beacon probe mount.

because of the extra length of the beacon mount i would add supports just under the new beacon section   

I have not used this with dragon burner only rapid burner. The probe height is fixed aside from editing the model to shorten or adding printed spacers so i do not know how this fits with other hotends only rapido uhf.
 

Made belt holes bigger. added beacon probe mount. moved mgn9 mount up and closed off some open space for a better fit