BambuLab A1mini Waste collector with blade bracket + 180mm heightened baffle

English：

The picture is an old model I designed before. The current MK02 file is a new model that has fixed many problems. The model file is a scrap collector and a 180mm heightened baffle. You can use A1m to print the whole part [Of course I recommend using P1 or X1 to print]. 0.2 storey height and PLA will do

2023.10.18 renew MK03

The new model is more material-saving and is controlled at around 100 grams. If you often print very tall multi-color printing models, it is strongly recommended to print the included 180mm heightening plate. No support is required during printing, and most of the right-angled edges are optimized to reduce the risk to children.

新款更加节省材料，控制在100克左右，如果经常打印很高的多色打印模型强烈建议打印附带的180mm加高板 打印时无需加支撑，优化了大部分的直角边降低造成儿童的危险性