Customizable cord wrap

I made a cable holder based on designs I remembered from dealing with crash carts in server rooms and whatever I found while googling "cord wrap."

I have a laser printer that sits on top of a drawer with wheels, and I didn't like that the printer's power and network cables could get in the way when I moved the drawer, so I created these cord wraps to manage the cables.

Printing instructions

Print on the side (profile). See cord_wrap_230x30.3mf file for details.

There are printed bars at the end of the wire hooks; I added them to avoid using supports for the model. The model should be printed without supports.

Use pliers to remove the bars after the part is printed.

BOM

4x 3mm width 10mm length self-taping screws.

Photos

The following sizes of cable holders are pictured in the photos (width, height):

• 180x20mm
• 230x30mm

There's also an additional STL model of 210x20mm that I didn't print.