I printed this object, but it is only good if the propellers are in one direction and can be removed without problems, while the other propellers which are inverted cannot be attached. What system did you use to remove all 4?
Pavo Pico Prop Remover Tool for 45mm 3 Blade
A tool to easily extract a 45mm 3 blade prop from the motor without damaging neither prop nor motor.
24
175
1
885
updated October 15, 2023
Makes
Comments
shell has to be scaled up 1-2% horizontally to fit and would be more useful if it had grips on both sides for pulling
This is a great design! Will this work on 31/40mm props for tinywhoops?
View one more comment
@echterhoff_202177 thanks I will print up one of these and give it a try. I think the pin holder would have to be a 1mm pin for the smaller props. Do you think you could make a version with a 1mm pin hole? Or else I can just give it a go on Tinkercad, I'm just getting started wit CAD design :D
@echterhoff_202177 do you have any recommendations for printing materials?
Edit: I see in the details you recommend PLA, will try that. (edited)
@Yahoo_579406 Glad you like it. Thanks for sharing your prints with me. :-)