I got a request for a ammo box for 12 GA Remington. The spacing is 48pcs/20,90x70mm between insert top and the bottom. And the total height between top and bottom is 73,35mm.
I made 48pcs so that would fit the most printers. The size of the box is 199,30x165,47x77,85mm.
I use 4pcs of M3x20mm but it will fit 22-25mm as well. For the hinge i use 1,6mm stainless steel tig-welding pin. I used 1,6mm pin to the latch and latch cam on the .22lr i made. Tell me if that is of interest to start using instead or as an option for this and future boxes.
I have not printed this but i hope Alec who requested it can tell us how it works. But i would definitely printed it at least 4 perimeter in PLA and PETG and 3 with ABS bec. of the weight of the ammo.
Hope you like it.
The author remixed this model.
I use a remix of the latch and latch cam.