Cherry MX keycaps, inkl. parametric files

Keycap for Cherry MX, the parametric FreeCAD-files are there: https://github.com/benjaminwand/Cherry-MX-keycaps

In FreeCAD, go to 'Spreadsheet' and change 'x' and 'y' to adjust size. Don't go smaller than 14mm because if smaller there would be no space for the key to move. If the keycap sits too loosely or you can't get it onto the switch, play with 'Dicke Kreuze'.

Initially I made this for a controller-hardware for voctomix https://github.com/benjaminwand/voctoknopf1 but you can use it for any self-made hardware that uses Cherry MX switches.

Last updated: December 19th 2017

Print Settings

Rafts:

Yes