Printing information:
- The hinge needs to be supported during the print, i recommend non-tree supports so that the whole length of the hinge is covered.
- Make sure your supports don't get between the hinge pin and rollers. To avoid this you can enable “supports only from buildplate” in most slicers.
- Everything prints as one piece.
Please refer to the original model for additional information. All credits go to the original author.
---
Erratum (15/03/24):
- Added more comments into the fusion file
- Added files for empty box
- Shared the .3mf (Bambu Studio) settings I use to print this model succesfully
- Added images of printed model
- Improved printing information
Erratum (08/09/24):
- Added thicker hinge model
- Added hinge test models
Tags
The author remixed this model.
Differences of the remix compared to the original
I changed the original hinge design to make the design print-in-place, i added options to control the infill of both halves for easy remixing and I fixed some tiny issues with the original design.