Many thanks to Maeshmaker for the great design of the laser warning sign!
https://www.printables.com/de/model/60801-laser-warning-sign-laserwarnzeichen
Since I'm currently testing the laser on the Snapmaker, I wanted a warning sign like this for my workshop door.
I glued a magnet to the back of the sign to attach it to this metal door.
I'm just uploading two examples of customization of the sign here as a remix. To do this, I loaded the 1mm base stl from Maeshmaker into the PrusaSlicer
And adjusted it there:
By scaling up in x and y
(Open scaling lock!)
And add text (0.6mm high/positive)
my two example files should
Fits the MK3 and MK4 as they are.
Of course, you can also scale these larger or smaller according to your wishes.
I used the automatic color change offered by the Prusaslicer for the filament/color change.
(M600 after layer height 1mm).
------------
Vielen Dank an Maeshmaker für das großartige Design des Laserwarnschildes.
https://www.printables.com/de/model/60801-laser-warning-sign-laserwarnzeichen
Da ich am Snapmaker derzeit den Laser teste, wollte ich so ein Warnschild für meine Werkstatttür.
Habe zur Befestigung an diese Metalltür auf die Rückseite des Schildes einen Magneten geklebt.
Ich lade hier als Remix nur zwei Beispiele für eine Individualisierung des Schildes hoch. Ich habe mir dafür das 1mm base stl von Maeshmaker in den PrusaSlicer geladen
Und es dort angepasst:
Durch aufskalieren in x und y
(Skalierungsschloss öffnen!)
Und Text hinzufügen (0.6mm hoch/positiv)
meine beiden Beispieldateien sollten
so wie sie sind auf den MK3 und MK4 passen.
Ihr könnt diese natürlich auch euren Wünschen entsprechend noch grösser oder kleiner skalieren.
Für den Filament/Farbwechsel habe ich den im Prusaslicer angebotenen automatischen Farbwechsel hinzugefügt.
(M600 nach Layerhöhe 1mm).
The author remixed this model.
grösse durch skalieren in x und y geändert, text hinzugefügt.
size changed by scaling in x and y, text added