Avatar the Last Airbender Element Keychains

A collection of the 4 elements from Avatar the Last Airbender as keychains! If you want any others or any changes let me know and I can make them! 

These can be a bit of a pain to print all together even with an AMS/similar device because it's 5 total colors. I did 3 in one print then the last one alone.  

The original models are much much bigger than needed, to get a size I liked:

• Scale the X and Y down to 30% 
• Scale Z to 100% (for color swap)
• 0.08mm layer height
• 100% infill
• monotonic layer pattern
• Ironing on the topmost surface

The multicolor is done with a layer swap, 

1. Start with the color you want (light blue, blue, red, or green)
2. Swap to white on layer 12