Hueforge storm trooper

Original art created by us then we used Hueforge to create this grayscale 200x200 piece.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal 
PLA BambuLab Basic Gray 
PLA BambuLab Basic Silver 
PLA BambuLab Basic Jade White 

Swap Instructions:
Start with Charcoal
At layer #3 (0.32mm) swap to Gray
At layer #10 (0.88mm) swap to Silver
At layer #15 (1.28mm) swap to Jade White for the rest.