Objects:
This contains two files - Original and Night Style.
Both of these retain usability of the ‘OG sight’ that is folding and fitting the general shape.
‘Original’ is contained within single file. It's meant to be a replacement if the original is missing or had been damaged. I've used this as a base for ‘Night Style’, no reason not to include it.
‘Night Style’ features an open channel for the insert to gather more UV light (in theory), requires additional insert to be printed, preferably out of different material. The insert does not need to be ‘glow in the dark’ filament but highly recommended for the use.
There are two inserts - 2.8mm and 2.7mm. The hole is 3mm wide, so the one you want to use depends on your printer and orientation. 2.8mm worked OK for me.
Printing:
Print the sights on their thinner side, front side facing upwards. I've printed in 0.1mm, should be OK within 0.15mm but I haven't tested it.
Assembly:
‘Original’ - no extra assembly needed.
‘Night Sight’ - use pliers to gently squeeze in the thin insert into the sight.
The author marked this model as their own original creation.