Printer Friendly Aerogarden Bounty Trellis

Optimized for better printability
18
79
0
430
updated October 7, 2023

Description

PDF

Trellis for Aerogarden Bounty models. Can be stacked. 

Print A and B plus 4x connectors per level.

I used PETG with 2 wall loops and 25% infill and it was plenty strong. Adjust as desired.

 

The f3d file for the connector is parametric and the height of the trellis can be adjusted by altering the “effective_length” parameter to the desired value. 

Leave a comment if you want a specific height and are unable to adjust yourself. I'll post an stl for you. 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Scholtzan's model did an excellent job of replicating the OEM trellis. However, the OEM was designed for injection molding and can not be 3D printed easily, especially the connectors (legs).

I completely redesigned the connectors so they can be printed flat on their sides, and the height can be easily customized in Fusion 360.

I also closed in the bottom of the trellis to improve bed adhesion and eliminate the need for bridging or supports***. 

***Note that supports are still needed for the male connector that joins the two halves together.

License