A panda head for you key chain, reinforced and optimized for 3d printing.
9
48
0
153
updated November 18, 2023

Description

PDF

A friend wanted to have a panda head for their key chain. So I designed this part with the geometry inspired by the original part. Compared to the original I made quite some changes you can see below. Finally this design is optimized for printing without scaling in the slicer.

Print instructions:
  • Filament of your choice
  • Layer height of your choice
  • NO supports needed

I would be happy to see some of your makes posted :)

Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

In my opinion the original model is not optimized for 3D printing. So I made some changes:

  • Adjusted the wall sizes for better printing and strength.
  • Adjusted the height of the model, to avoid scaling in the slicer.
  • Connected the eyes to the top to reinforce the part.
  • Designed the eyelet to be printed without supports.
  • Reinforced the eyelet.
  • Minimal adjustments to the dimension to make them more even, this allowed a easier redesign.

License