These are the parts for a CEN-TECH 100ft (30m) Open Reel Measuring Tape center hub replacement. There are four parts to replace when the center hub gets broken.
I had the tape attach pin break off the Inner Spool which also damaged the other parts.
I reused the handle and its attach role pin as they did not break.
Hardware Required
(2) 3 x 15mm countersunk screws
(1) 3 x 10mm button head screw
The 3x15mm screws are used to attach the HandleEnd to the InnerSpool after everything is assembled in the CEN-TECH case.
The 3x10mm screw is used to attach the OuterEnd to the InnerSpool when assembly in the CEN-TECH case.
The author marked this model as their own original creation.