TP-Link Deco M4 Wall Mount - Oct 2023

Personally I printed with 0.6 nozzle, and at least 3 outlines so wall's don't end up with a line of fill in the middle.. prints so much better.. if using 0.4 I would add more outlines.. 

I also printed in PETG I don't mess with PLA much..

only change -1 to -2 is the radius on -1 is little to small so there are gaps..  I need to print 2 and see if I corrected enough or to much..  but V1 does hold x20 very well